How do you pair the wireless key fob to the QUICK-CASTER™ 300W tailgate spreader?

Here is a video that walks you through set up. Connect power: Plug the 7-pin connector into your vehicle. Reset fob: Press the “add” button on the back with a paperclip until the blue light flashes. Input sequence: On the front of the fob, press 50%, OFF, 100%, 50%, OFF, 100% until the blue light stops flashing. Test manual mode: Flip the toggle switch down to manual override. Power cycle: Unplug the 7-pin connector, wait a few seconds, and plug it back in. Interrupt power: Once the spreader starts, unplug it again immediately. Reset and reconnect: Flip the toggle to neutral, then plug the 7-pin connector back in. Clear control board: Hold the toggle up in the “learn” position for 15 seconds, then release to neutral. Enter training mode: Toggle up to “learn” for 2 seconds. Sync fob: Press and hold the 50% button on the fob for 30 seconds. Verify operation: Start the spreader and cycle it on and off to confirm it works.

Are new controllers interchangeable with older QUICK-CASTER™ 300W wireless tailgate spreader?

No, the updated controller cannot simply be swapped in as a direct replacement for older models. Upgrading requires installing a complete kit that bundles both the new receiver and fob together, ensuring proper pairing and flawless system communication.

Why is the QUICK-CASTER™ 300W tailgate spreader a convenient tailgate spreader option?

Installation is straightforward. It plugs directly into your truck’s standard 7-pin trailer harness and operates via a wireless key fob, you can skip the hassle of drilling into your dashboard or routing messy wires through the firewall entirely.

Can you easily interchange the QUICK-CASTER™ 300W wireless spreader on multiple vehicles within your fleet?

Yes, the QUICK-CASTER™ 300W is an ideal choice for UTVs, tractors, and work trucks when you need the flexibility to swap units between vehicles with minimal downtime. As long as each vehicle is equipped with a standard round 7-pin trailer connector, you’re good to go. The unit ships standard with a 2-inch receiver hitch, and a variety of additional mounting options are also available to suit your exact setup. Visit the Spreader Selector to confirm compatibility.

QUICK-CASTER^™ 300W
WIRELESS ELECTRIC TAILGATE SPREADER

Quick Specs

3.00 cu ft Capacity
68 lb Approx. Weight (Empty)

Material: Salt
Standard Mount: Receiver Hitch (+3 More Options)

Does this Spreader fit my vehicle?

Verify compatibility and part number information

ULTIMATE SPREADER MADE FOR CONVENIENCE

When you need traction control without the hassle, the FISHER^® QUICK-CASTER™ 300W tailgate spreader is the ultimate tool. This wireless, electric spreader delivers salt exactly where it’s needed with maximum plug-and-play convenience, mounting quickly to your UTV, tractor, or truck. With a trusted poly construction and wireless key fob control, you can load up and get to work instantly. It’s the swift, hassle-free way to master winter.

Compatible with UTVs, Tractors & Trucks

Unique Features

What Sets QUICK-CASTER™ 300W Apart

Hopper Construction

Lightweight, rust-proof polyethylene hopper paired with a reinforced, powder-coated steel frame for maximum durability

A black mechanical device with a circular base, a vertical screw-like component in the center, and two side panels, photographed against a plain white background.

Material Delivery

Material is delivered by a vertical steel auger and maintains a steady output while preventing wasteful spills

Motor

The specially designed ⅓ HP, 12-volt electric motor and high-torque transmission are fully enclosed for protection from the elements.

Spinner

Clear Weather Cover

Standard Options

Mounts & Controls

Mounts

STANDARD

Receiver Hitch Mount

Included With New Spreader Purchase

A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.

SOLD SEPARATELY

3-Point Mount

#75923 (Sold Separately)

Easy to attach and easy to understand, the 3-Point Mount from FISHER® puts a 2″ receiver hitch on the back of your tractor. Specifically designed for tailgate spreaders, this 3-point hitch mount has been tested to withstand the rigors of hauling heavy de-icing materials in demanding weather and terrain.

SOLD SEPARATELY

Utility Mount

#75922 (Sold Separately)

The Utility Mount is designed to bolt to the floor of a utility bed. The reinforced framework uses 8 bolts to attach to a utility bed and provides a sturdy 2″ receiver for the QUICK-CASTER 300W to attach to.

SOLD SEPARATELY

Drop Utility Mount

#75920-1 (Sold Separately)

The Drop Utility Mount is a low-profile mount designed to position the QUICK-CASTER 300W lower for easier filling and better material control. The mount attaches to the bed floor of a utility vehicle with quick-connect pins for easy removal.

Controls

STANDARD (Upgraded!)

Wireless Key Fob

Included With New Spreader Purchase

The completely wireless key fob control offers one-touch, on/off operation with two spinner speeds to match the spread pattern to the job.

Material compatibility

Bagged Salt

See Details

Accessories

View All Accessories

WIRELESS VEHICLE HARNESS

Part Numbers

Part Number

#75924

For the QUICK-CASTER 300W

Supplies a 7-wire connection to power the spreader. Use on applications where trailer wiring is not factory installed such as tractors and UTV’s.

Specifications

Metric

Specification	80030
Capacity	3.00 cu ft
Spreading Width	Up to 25'
Approx. Weight (Empty)	68 lb
Overall Dimensions (LxWxH)	22" x 30" x 32"
Auger (Diam. x Length)	2 ½" x 5 ¾" Vertical High-Flow
Spinner Size	10"

Specification	80030
Model Number	300W
Vehicle Compatibility	UTVs, Tractors, ½, ¾, 1-Ton Pickup Truck Tractors, UTVs, SUVs, 1-Ton or Smaller Pickups
Material Compatibility	Bagged Rock Salt
Motor	Electric, 12V ⅓ HP
Hopper Construction	Polyethylene
Available Mounts	Standard 2" Receiver, Optional Drop Utility, Trailer, Utility, 3-Point Mounts

Compare Products

Does this spreader fit my vehicle?

Easily identify which FISHER® spreaders will meet your needs, based on vehicle and material compatibility.

Spreader Selector

Product Support & Resources

Buying Resources

Full-Line Brochures

Spreaders

Download

Spec Sheet

Printable specification sheet for QUICK-CASTER™ 300W

Download

Services & Support

Parts Lists

Search Documents

Installation Instructions

Search Documents

Owner's Manuals

Search Documents

Mechanic's Guide

Search Documents

Parts Finder

View

eSearch

Find service documentation for your QUICK-CASTER™ 300W model. Search by part number, literature number, or keyword.

Search Documents

Photo & Video Gallery

View Full Gallery

A utility vehicle with a rear-mounted yellow salt spreader dispenses salt onto a snow-covered sidewalk in a park area, with trees, buildings, and a church visible in the background.

A utility vehicle spreads salt or grit from a yellow spreader onto a snowy and icy sidewalk near a brick building. The driver is visible through the rear window.

A large yellow cone-shaped spreader is mounted on the back of an orange utility vehicle, positioned over the rear wheels and bumper area.

A vehicle spreads blue de-icing salt onto a snow-covered road using a yellow salt spreader attached to its rear.

Video Gallery

View Full Gallery

Frequently asked questions

Here is a video that walks you through set up.
- Connect power: Plug the 7-pin connector into your vehicle.
- Reset fob: Press the “add” button on the back with a paperclip until the blue light flashes.
- Input sequence: On the front of the fob, press 50%, OFF, 100%, 50%, OFF, 100% until the blue light stops flashing.
- Test manual mode: Flip the toggle switch down to manual override.
- Power cycle: Unplug the 7-pin connector, wait a few seconds, and plug it back in.
- Interrupt power: Once the spreader starts, unplug it again immediately.
- Reset and reconnect: Flip the toggle to neutral, then plug the 7-pin connector back in.
- Clear control board: Hold the toggle up in the “learn” position for 15 seconds, then release to neutral.
- Enter training mode: Toggle up to “learn” for 2 seconds.
- Sync fob: Press and hold the 50% button on the fob for 30 seconds.
- Verify operation: Start the spreader and cycle it on and off to confirm it works.
Yes, the QUICK-CASTER™ 300W is an ideal choice for UTVs, tractors, and work trucks when you need the flexibility to swap units between vehicles with minimal downtime. As long as each vehicle is equipped with a standard round 7-pin trailer connector, you’re good to go. The unit ships standard with a 2-inch receiver hitch, and a variety of additional mounting options are also available to suit your exact setup. Visit the Spreader Selector to confirm compatibility.

What Products
Fit My Vehicle?

What Products
Fit My Vehicle?

What Products
Fit My Vehicle?