STEEL-CASTER™ Compact Accessories

Extension Collars

EXTENSION COLLARS

An extension collar is available as an accessory to increase material capacity for vehicles that can handle the additional weight. 0.25 cu yd extension collars available for the 0.35 cu yd hoppers and 0.5 cu yd extension collars available for the 0.7 cu yd hoppers.

Part Number

#85698
For 0.35 cu yd Models
#85699
For 0.7 cu yd Models
50 Gallon PreWet

50-GALLON PRE-WET & DIRECT LIQUID APPLICATION KIT

With the addition of this accessory to the 0.7 cu yd model, operators will have the ability to pre-wet materials or spray brine directly onto the driving surface for anti-icing applications. The accessory kit includes two 25-gallon pre-wet tanks, a pump and a spray kit.

Part Number

#85695
For 0.7 cu yd Models
Spill Guard Kit

SPILL GUARD KIT

A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60″ for the 0.35 cu yd model and 75.5″ for the 0.7 cu yd model. This allows loading with a 5′ loader bucket and prevents overflow and spill into the bed of the vehicle.

Part Number

#85696
30" Kit for 0.35 cu yd Models
#85697
43" Kit for 0.7 cu yd Models
LED Work Light

LED WORK LIGHT KIT

See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.

Part Number

#99505-2
For All Models
Strobe Light Kit

LED STROBE LIGHT KIT

Make sure you’re seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you’re seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.

Part Number

#99494
For All Models
Tarp Kit

TARP KIT

Keep de-icing material dry in your 0.35 and 0.7 cu yd stainless STEEL-CASTER™ spreaders with affordable and easy to install tarp covers and bungees.

Part Number

#30059
0.35 cu yd Model
#30061
0.7 cu yd Model
Central Point Grease

CENTRAL POINT GREASE KIT

The Central Point Grease Kit provides easy access to grease points, simplifying preventative maintenance greasing that is essential to maximize bearing life.

Part Number

#11763
For 0.7 cu yd Models
Vibrator Kit

VIBRATOR KIT

Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.

Part Number

#76668
For All Models
Inverted V Kit

INVERTED V KIT

Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.

Part Number

#85706
For 0.35 cu yd Models
#85707
For 0.7 cu yd Models
Tie Down Kit

RATCHET TIE-DOWN KIT

Positive locking mount with ratchet-strap assist provides additional in-bed stability, security, and simplifies installation for multiple vehicle types.

Hopper spreaders require bolting to the truck frame for proper operator safety.

Part Number

#68790
For All Models
Truck Upfit Kit

TRUCK UPFIT KIT

This kit contains a longer truck harness, license plate kit, CHMSL kit, and a ratchet tie down kit so the 0.35 cu yd hopper can be used in place of an auger tailgate spreader when using sand.

Part Number

#85693
For 0.35 cu yd Models
License Plate

LICENSE PLATE KIT

Stay street legal with this illuminated License Plate Kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot that is visible and legally compliant. Don’t leave without it.

* Required if using 0.35 cu yd hopper on a truck.

Part Number

#85694
For 0.35 cu yd Models
Vehicle Side Harness Kit

VEHICLE-SIDE HARNESS (FLEET FLEX)

The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.

Part Number

#85692
For 0.35 cu yd Models
#78402
For 0.7 cu yd Models
Spreader Control Plate

SPREADER CONTROL ADAPTER PLATE

Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.

Control Cup Holder Mount not included, order separately (#82006).

Part Number

#82018
For All Models