TEMPEST Compact Accessories

REARVIEW MATERIAL MONITORING CAMERA

Easily view your material output from the comfort of your cab by using the material monitoring camera. It attaches to the top of your spreader for optimal visibility of material spread pattern. The monitor is installed inside your cab so you can ensure a smooth spread pattern and optimal material output.

EXTENSION COLLARS

An extension collar is available as an accessory to increase material capacity for vehicles that can handle the additional weight. 0.25 cu yd extension collars available for the 0.35 cu yd hoppers and 0.5 cu yd extension collars available for the 0.7 cu yd hoppers.

SPILL GUARD KIT

The Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, while preventing material from overflowing into the bed of the truck from off-center loading.

RATCHET TIE-DOWN KIT

Positive locking mount with ratchet-strap assist provides additional in-bed stability, security, and simplifies installation for multiple vehicle types.

Hopper spreaders require bolting to the truck frame for proper operator safety.

CENTRAL POINT GREASE KIT

The Central Point Grease Kit provides easy access to grease points, simplifying preventative maintenance greasing that is essential to maximize bearing life.

* Chain Models Only (S070C, S150C, S220C, S300C, S400C & S500C)

PULLOVER TARP KIT

Protect de-icing material from the elements and lock out moisture to prevent material bridging with a pullover tarp. Fitted to the hoppers dimensions, the tarp kit is held securely in place with included durable rubber bungees

VIBRATOR KIT

Designed to help move stubborn material and prevent bridging, a genuine FISHER® Vibrator system will ensure that less-than-ideal material, which is prone to bridging and clogging, will not hold you up when you need to be on the move.

INVERTED V

Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.

TRUCK UPFIT KIT

This kit contains a longer truck harness, license plate kit, CHMSL kit, and a ratchet tie down kit so the 0.35 cu yd hopper can be used in place of an auger tailgate spreader when using sand.

VEHICLE-SIDE HARNESS (FLEET FLEX)

The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.

LICENSE PLATE KIT

Stay street legal with this illuminated License Plate Kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot that is visible and legally compliant. Don’t leave without it.

* Required if using 0.35 cu yd hopper on a truck.

LED STROBE LIGHT KIT

Make sure you’re seen, day or night, with our complete hopper LED Strobe Light system. Constructed from high impact plastic, and rated beyond -20º F, this yellow LED strobe system has been designed to last and will ensure that you’re seen in even the worst of conditions.

LED WORK LIGHT KIT (PRIMARY)

A genuine FISHER® LED Work Light system will grant you increased visibility at the rear of your spreader. Encased in anodized aluminum, and rated beyond -20º F, this LED Work Light system projects over 1000 lumens to help you monitor material distribution and illuminate potential hazards while backing up.

LED WORK LIGHT KIT (SECONDARY)

A genuine FISHER® LED Work Light system will grant you increased visibility at the rear of your spreader. Encased in anodized aluminum, and rated beyond -20º F, this LED Work Light system projects over 1000 lumens to help you monitor material distribution and illuminate potential hazards while backing up.